Patz Model 800 TMR Stationary Single Screw
Vertical Mixer - Specifications
 |
U/M | V270 Low Profile | V350 |
| Capacity Mixing/Top of Mixer |
ft.³ (m³) |
270 (7.6) |
350 (9.9) |
| Unit Empty Wt. Max. Load Max. Gross Wt. No. of Screws Overall Length Overall Height Overall Width Screw Flighting Thickness Floor Thickness Sidewall Thickness Horsepower Requirements |
lbs(kg) lbs(kg) lbs(kg) In(m) In(m) In(m) In(mm) In(mm) In(mm) |
5,083 (2305) 6,750 (3062) 11,833 (5368) 1 135 (3.43) 84-5/8 (2.15) 107 (2.72) 1/2 (13) 1/2 (13) 3/16 (5) 20 (2-10HP, 1-Ph) 30,40 or 50 HP, 3-Ph |
5,355 (2429) 8,750 (3969) 14,105 (6398) 1 142 (3.61) 90-5/8 (2.30) 107 (2.72) 1/2 (13) 1/2 (13) 3/16 (5) 20 (2-10HP, 1-Ph) 30,40 or 50 HP, 3-Ph |
| Scale System | 3 Point | 3 Point | |
| Door Opening Height Width Location |
In (m) In (m) |
39 (1) 34 (0.9) Right, Left, or Both |
39 (1) 34 (0.9) Right, Left, Both, or Back Commodity Door |
|
Options Manual Door Control Hydraulic Door Control Discharge Chute w/ or w/o Magnet No. of Knives -Hardened Tungsten/Carbide Knife Backing Plate Wide Selection of Indicators Hour Meter, Sensor Activated Ladder |
Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. |
Opt. Opt. Opt. Opt. Opt. Opt. Opt. Opt. |
This mixer is designed to handle a variety of feedstuffs based on an estimated 25 lbs. per cubic foot. Do not exceed stated maximum load. Contact Patz for applications requiring heavier materials.
Specifications and prices subject to change without notice.