Patz Model 3605 Trough Slider-Bed Belt Conveyor - Specifications
Standard Equipment
Overall Lengths: 10' (3.048 m) to 120' (36.576 m) in 10' (3.048 m) increments. Maximum length of individual bed section is 10' (3.048 m); modular sections bolt together for lengths beyond 10' (3.048 m).
Frame: Concave open bed, formed 14 ga. high gloss polyester powder coated steel; 6-1/2" (165 mm) depth; 38-3/4" (984 mm) width.
Belt Width: 36" (914 mm).
Belt: None standard; order as optional equipment.
Belt Speed: 370 ft/min (112.8 m/min), 260 ft/min (79.2 m/min), 130 ft/min (39.6m/min), or 65 ft/min (19.8m/min), depending on drive selected.
Drive Pulley: 5" (127 mm) dia., crowned, steel, rubber lagged.
Tail Pulley: 5" (127 mm) dia., finned, steel.
Bearings: Long-life, sealed, prelubricated, greaseable.
Belt Take-up: Screw-type take-up at tail pulley.
Drive Motor: None standard; order as optional equipment.
Drive Mount: None standard; order as optional equipment.
Load Capacity: Up to 440 ft³/min (12.46 m³/min); 3,700 lb./min (1678 kg/min); or 800 lb. (363 kg) on conveyor.
Span: Up to 20' (6.096 m) between supports.
Electrical Controls: Customer supplied, except optional equipment.
Assembly: Conveyor supplied unassembled.
Optional Equipment
Overall Lengths: Conveyor lengths from 4' (1.219 m) to 120' (36.576 m) are possible. Intermediate lengths are possible by field cutting.
Belt: Black, P.V.C. 120 COS, smooth or textured. Other belts available on request.
Drive Motors: 1 to 3 H.P., 1 Ph. or 3 Ph.; hydraulic motor drive also available.
Drive Mounts: Top or bottom mounting; end drive.
Conveyor Supports: Supports and mounting hardware available.
Covers: 14 ga. high gloss polyester powder coated steel in 10' (3.048 m) lengths.
Loading Hoppers: Funnels material into conveyor trough.
End Spout: Directs material discharge.
Spout Extension: Attaches to end spout.
Belt Wipers: Blade and brush types for cleaning for cleaning top of belts.
Convey Sides: Positions material and helps seal edges to prevent material under belt