Patz Model 1608 Trough Slider-Bed Belt Conveyor - Specifications
Overall Lengths: 10' to 200' (3.048 m to 60.960 m).
Note: Sections can be field cut to exact lengths for custom fit.
Span: Up to 20 ft.
Floor Supports: Note: Support is required at each end of conveyor and at each section joint.
Incline:
Up to 15° with smooth belt (limit to 5° with frozen material)
Up to 30° with textured belt
When conveyed material is frozen, the incline achievable may be substantially reduced.
5° = 1 inch elevation per foot
15° = 3-1/4 inch elevation per foot
30° = 7 inch elevation per foot
Drive Unit: Direct drive through a speed reducer (390 or 260 FPM)
Belt Width: 16 in.
Belt Surface: Smooth or textured interwoven polyester impregnated with polyvinyl chloride (PVC). Other belts available upon request.
Speed: 390 FPM, 260 FPM, depending on drive selected.
Assembly: Equipment supplied partially assembled for shipping purposes, additional field assembly required.
Drive Motor:
1 to 3 HP, 1 Ph. or 3 Ph. electric motor drive; hydraulic motor drive also available.
3 HP or 5 HP, 1 Ph. or 3 Ph. electric motor drive.
Motor mounts top or bottom
Recommended Use: Grains, sawdust, forages, chips and many other bulky materials.
Dimensions:
For Hopper PA-9038
Overall height at hopper 26"
Overall width at hopper 16"
Overall length at hopper 24"
For Hopper PA-9018
Overall height at hopper 21"
Overall width at hopper 32-1/2"
Overall length at hopper 47"
Overall width at drive end 31-1/4" (5 HP)
Overall height at drive end with motor 16-1/8" (5 HP)
Overall length of unit - total length of sections plus 34-1/2"
Conveyor Sections:
Overall width of section 17"
Overall height of section 6-1/2"
Overall height with conveyor cover 14-1/2"
High gloss polyester powder coated steel - 16 ga. - 10 ft.
Open center, Concave