Patz Model 262 Conveyor - Specifications
Standard Equipment
Overall Lengths: 11', 16', 21', 26' (3, 4.9, 6.4, 7.9 m).
Trough Lengths: 10', 15', 20', 25' (3, 4.6, 6.1, 7.6 m). Any length from 4' to 25' (1.2 to 7.6 m) by field cutting.
Loaded Trough Widths: 10" (254 mm) bottom; 12-1/2" (318 mm) top.
Frame: Trough with enclosed chain return, formed 16-gauge high gloss polyester powder coated steel, 14-3/4" (375 mm) width and 12" (305 mm) height [17 -3/4" (451 mm) with covers]. Modular sections bolt together.
Chain: No. 62 detachable, steel.
Flites: 2-1/2" by 9" (64 to 229 mm) rubber and 12" (350 mm) spacing.
Chain Speed: 160 F.P.M. (49 M.P.M.)
Bearings: Greaseable sleeve.
Chain Take-up: Screw type at tail end.
Drive Motor: None standard; available as optional equipment.
Drive Mount: End drive, above trough.
Load Capacity: Up to 81 cubic feet (2.3 cu. m) per minute, 1,460 pounds (662 kg) per minute, 225 pounds (102 kg) on conveyor.
Span: Up to 25' (7.6 m) between supports.
Optional Equipment
Drive Motors: 1 H.P. (746 watts), 1 Phase or 3 Phase
Conveyor Support Bracket: Protects bottom of conveyor where supported or suspended.
Covers: Bolt-on 10' (3 m.) covers are available in same lengths as conveyor sections.
Loading Hopper: Funnels material into trough; 34" (864 mm) width.
Conveyor Spout Assembly: Installs on front end of conveyor.
Short Spout: Installs on front end of conveyor.
Long Spouts are available.